Drip edge installation
Drip edge is added where the roof edge had none which stops the rot from coming back.
Exterior Services
Fascia Repair Morristown, NJ
A Morristown roofer can repair the fascia boards that carry your gutters and cap the ends of the rafters, once the source of the water is found. Call (862) 363-5004 to reach a local roofer.
Fascia rot nearly always comes from water getting behind the gutter. Clogged or poorly pitched gutters spill over the back, and a roof edge with no drip edge sends water straight down the fascia. Once the wood is soft, gutter hangers pull loose and the gutter sags or tips forward.
Rotted fascia is often the visible part of a bigger problem. Behind the board are the rafter tails, the roof decking at the edge and the soffit, and water that gets past the fascia soaks into all of them. On homes with metal fascia wrap, the rot often goes unseen until the gutter falls.
A few observations make the first conversation more useful. Write down which sides of the house show peeling paint, gaps or a sagging gutter. Say whether the fascia is bare wood, painted, PVC or wrapped in metal, since that changes the repair.
Many fascia repair calls in Morristown also turn up a need for soffit repair or gutter installation.
Need fascia repair in Morristown? Call (862) 363-5004 to talk to a local roofer.
Call nowThe process
How fascia repair works
Good fascia work deals with the roof edge, the gutter and the board together.
Find the water path
The roofer checks the drip edge, the first course of shingles, the gutter pitch and the downspouts above the damaged fascia. The length of the damage decides how much board is replaced.
Free the board
To reach the fascia, the gutter over it is removed and the hangers pulled. Worn spikes are replaced with hidden hangers and screws.
Check the rafter tails
Soft rafter tails are cut back and sistered with new lumber, and rotted decking at the edge is replaced. New fascia nailed to rotten rafter ends will loosen again.
Fit the board
The new board is fastened to the rafter tails with corrosion-resistant nails or screws, with tight joints at the corners. End grain is sealed so it does not soak up water.
Fix the edge flashing
The metal drip edge at the roof edge is adjusted so runoff lands in the gutter, not behind it. Without it, the same board will rot again.
Reattach gutters
The gutter goes back up with new hidden hangers screwed into solid wood, pitched toward the downspout. Wood fascia gets a finish coat of paint.
What is included
What fascia repair covers
Soft fascia
Damaged fascia is replaced with primed wood or PVC and scarfed into the existing board.
Fascia wrapping
Metal wrap can be added over new or sound fascia once any rot is gone.
Gutter rehanging
Loose gutters are refastened and pitched toward downspouts at the right slope.
Framing repair
Rotted rafter ends behind the fascia are sistered or rebuilt to keep the roof edge straight.
Related service
Fascia Board Replacement Morristown, NJ
When rot runs along most of a wall, or the boards are split and warped end to end, replacing the full run of fascia is the cleaner fix. The gutters come down, the old boards come off and the rafter tails behind them are checked before new boards go up. It is also the moment to choose a material, whether primed wood, PVC, composite or wood with an aluminum wrap.
For many Morristown homes it makes sense to replace fascia while the gutters are off for replacement anyway. Make sure rotted boards are removed, not covered. Also ask about the size of the new boards, since fascia that is too narrow can leave gaps at the soffit and gutter.
Related service
Fascia Board Repair Morristown, NJ
When rot is confined to short stretches, the damaged part of the board can be cut out and a new piece scarfed in. The new piece is joined with an angled scarf joint so the seam is strong and less likely to open. For a shallow soft spot, an epoxy consolidant and filler can restore the surface without cutting the board.
The repair is only worth doing if the water source is fixed at the same time. The cause is often a leaking gutter corner or a downspout that backs up. Done right, the repair is hard to spot once painted.
Local help
Fascia Repair Near Me
Around Morristown, fascia rot usually shows up behind gutters that overflow or along roof edges built without drip edge. Across Morristown and nearby communities including Cedar Knolls, Morris Plains, Whippany and Madison, the fascia under trees and heavy gutter loads is the first to go, which is why keeping gutters clear does so much to protect the fascia.
For fascia repair in Morristown, NJ or nearby towns like Cedar Knolls, Morris Plains, Whippany and Madison, call (862) 363-5004 to reach a roofer who covers your street.
What the local climate does to a roof
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Morristown, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Smaller repairs
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers who know Morristown
Roofers in Morristown know the roof types and weather wear common in local homes.
Clear next steps
Ask your questions before you agree to anything.
Common questions about fascia repair
Which fascia material lasts longest?
PVC and composite fascia resist rot and hold paint well. Primed wood is easy to match on older homes but needs regular paint. The drip edge and gutters decide how long any fascia lasts.
Do I need new fascia boards or just a repair?
Short sections of rot can be repaired by cutting out the bad wood and scarfing in a new piece. If the damage is widespread, new boards end up being the simpler fix. The framing behind the fascia decides how big the job really is.
Is it safe to wrap rotted fascia in aluminum?
Metal wrap only belongs over sound wood. Gutter screws go through the wrap into the rotting board and gradually pull loose. Wrap is a good finish over new or solid fascia.
Why do gutters pull away from the fascia?
A gutter is only as secure as the board behind it. Soft fascia lets the fasteners work loose, which is often the first sign of rot. Repairing the fascia and rehanging the gutter with hidden hangers fixes both problems at once.
Why is my fascia rotting?
Fascia rots when water runs down the board instead of into the gutter. A missing drip edge, clogged gutters and leaking gutter seams all keep the wood wet after every rain. Bare end grain and failed paint let water soak in faster.
More questions? Call (862) 363-5004
Other services that may help
Soffit Repair
Soffit repair for wood, vinyl and aluminum eaves, before rot spreads into the fascia and rafter tails.
Learn moreGutter Installation
New gutters and downspouts formed to fit the house, with the right size, pitch and outlet placement, from K-style aluminum to half-round and copper.
Learn moreGutter Repair
Fixing gutters that drip at the corners, sag between hangers or pull away from the fascia, so roof water drains where it should again.
Learn moreRoof Repair
Repairs for missing shingles, lifted tabs, cracked pipe boots, loose flashing and soft decking, matched to what is actually wrong up top.
Learn more
Looking for something else?
See all roofing servicesNeed fascia repair in Morristown, NJ?
Call now for Morristown fascia repair and help in the towns around it.